Glossary
Our sign glossary explains sign parts and permit words in plain English.
We define each sign part and permit term on our site in one sentence, and link it to the page that explains it in depth.
The parts of a channel letter, drawn
Tap a part of this drawing to see its name and what it does, then switch between front-lit, halo-lit and non-lit letters to see which parts change.
LEDs inside light the translucent face, so your name glows toward the street.
Parts you can see on our jobs
Each caption names the parts you can see in that photo.




Channel letter terms
The parts, lighting styles and wiring words for lit and non-lit channel letters.
- Channel letter
- A channel letter is a single three-dimensional letter built like a shallow can, lit or unlit, and mounted on its own.
- Return
- A return is the side wall of a channel letter, and its depth sets how thick your letter looks.
- Face
- A face is the front of a letter, or the panel that carries your graphics: translucent on a front-lit letter and solid metal on a halo-lit letter.
- Back
- A letter's back is its rear panel: aluminum on a front-lit letter and clear polycarbonate on a halo-lit letter.
- Trim cap
- Trim cap is the plastic rim that holds a front-lit face onto its returns.
- Trimless letter
- A trimless letter is front-lit without the plastic rim at its face edge, which keeps sharp points and fine details crisp.
- Front-lit (face-lit)
- A front-lit letter shines its light out through a translucent face.
- Halo-lit (reverse-lit, back-lit)
- A halo-lit letter has a solid face and a clear back, so its light washes your wall and outlines the letter.
- Combination (front-and-halo)
- A combination letter glows through its face and throws a halo on your wall at the same time.
- Open-face letter
- An open-face letter has no face, or a clear one, so the neon tubes or LEDs inside it show.
- Logo shape
- A logo shape is a channel letter can cut to follow the outline of your logo.
- LED module
- An LED module is a small sealed light unit fixed inside a letter or cabinet and wired in strings.
- Power supply (driver)
- A power supply, also called a driver, turns your building's power into the low voltage LEDs run on, and it is the part that fails most often.
- Class 2
- Class 2 is a low-energy power supply class the electrical code allows for sign LEDs.
- Raceway
- A raceway is a painted aluminum box behind your letters that carries the wiring and usually the power supplies, so your wall needs fewer holes.
- Wireway
- A wireway is a slimmer box behind your letters that carries wiring only.
- Backer panel
- A backer panel is a painted panel behind your letters, often used to give halo-lit letters an even surface to light.
- Weep hole (drain hole)
- A weep hole is a small hole at a letter's low point that lets water drain out.
- Translucent vinyl
- Translucent vinyl is colored film that lets light through, used to color lit faces.
- Day/night film
- Day/night film is perforated vinyl that shows one color by day and another when your sign is lit.
- Photocell
- A photocell is a light sensor that turns your sign on at dusk and off at dawn.
- Time clock
- A time clock switches your sign on and off on a schedule.
- Sign band (fascia)
- A sign band is the strip of storefront wall set aside for tenant signs.
- Legibility index
- A legibility index is the number of feet of reading distance each inch of letter height gives you; the United States Sign Council Foundation uses an average of 30 feet per inch.
Dimensional letter and panel terms
Solid letters and flat panels for building fronts and lobby walls.
- Dimensional letters
- Dimensional letters are solid letters cut, cast or formed from metal, acrylic, PVC or foam, with no lighting inside.
- Flat cut
- Flat cut letters are cut from a flat sheet or plate, so they have square edges and an even thickness.
- Cast letters
- Cast letters are metal letters poured into a mold.
- Fabricated metal letter
- A fabricated metal letter is hollow, with a metal face welded or soldered to metal returns.
- Formed plastic letters
- Formed plastic letters are thin plastic shaped over a mold, so they look deeper than they are.
- Laminate (metal laminate)
- A laminate letter has a thin metal or acrylic face bonded to a foam or acrylic core, and foam-core laminates are made for indoor walls.
- Patina
- Patina is a chemical finish that darkens bronze or brass.
- Flat panel sign
- A flat panel sign is a printed or lettered panel fastened flat to your wall.
- ACM
- ACM, aluminum composite material, is two thin aluminum skins bonded to a plastic or mineral core; DIBOND is one brand of it.
- Standoff sign
- A standoff sign is one panel held off your wall at its corners by round standoffs.
- Reception logo wall
- A reception logo wall carries your logo, in letters or on a panel, on your wall behind your front desk.
- Edge-lit acrylic
- Edge-lit acrylic glows from light fed into its edge.
- Storefront sign package
- A storefront sign package is your wall sign plus the window, door and sidewalk signs for one business front.
Cabinet, pylon and monument terms
Box signs, plaza signs and the foundations under freestanding signs.
- Cabinet sign (lightbox, box sign)
- A cabinet sign is an enclosed metal box with a translucent face and lights inside, so your whole graphic sits on one panel.
- Single-face, double-face
- A single-face cabinet lights one side, and a double-face cabinet lights two sides back to back.
- Retainer
- A retainer is the frame that holds a face in a cabinet.
- Flex face
- A flex face is a flexible face stretched tight in a frame, used for large faces without seams.
- Pan-formed face
- A pan-formed face is a rigid face molded with a raised rim, often with embossed copy, so it stays stiff in its retainer.
- Dog strip, hanger bar
- Dog strips and hanger bars run along a face's edge and keep wind from pulling the face out of its retainer.
- Push-through letters
- Push-through letters are thick acrylic letters that pass through cut-outs in a metal face and glow when lit.
- Routed face
- A routed face is an aluminum face with your copy cut out by a CNC router.
- LED stick
- An LED stick is an LED bar that replaces a fluorescent lamp in a cabinet.
- Blade sign
- A blade sign projects from your wall at a right angle so people on the sidewalk can read it.
- Projecting sign
- A projecting sign stands out from your wall instead of lying flat on it, and city codes set how far it may project and how high it must clear the sidewalk.
- Under-canopy sign
- An under-canopy sign is a small sign hung beneath a sidewalk canopy.
- Pylon sign
- A pylon sign is a tall freestanding sign with one or more cabinets on columns or a solid pier.
- Pole sign
- A pole sign stands on exposed poles, and some city codes tell pole and monument signs apart by how wide the base is compared with the cabinet.
- Monument sign
- A monument sign is a low freestanding sign on a solid base at ground level.
- Post-and-panel sign
- A post-and-panel sign holds its panels between posts set in the ground, with open space below.
- Tenant panel
- A tenant panel is one business's face in a shared plaza sign.
- Header panel
- A header panel is the top panel of a plaza sign, carrying the center's name.
- Pole cover
- A pole cover is an aluminum shroud that hides a steel pole.
- Caisson
- A caisson is a drilled, round concrete footing.
- Spread footing
- A spread footing is a wide, shallow concrete footing.
- Anchor bolts
- Anchor bolts are cast into the footing so your column's base plate can bolt onto them.
- Direct embedment
- Direct embedment means setting the pole itself in the concrete.
- CMU
- CMU, concrete masonry unit, is the standard concrete block.
- Stucco
- Stucco is a cement plaster finish over block or framing.
- Veneer
- Veneer is a thin facing of brick or stone over a structural core.
- Hard coat
- Hard coat is a tough urethane coating over a foam sign core.
- EMC (electronic message center)
- An EMC is a digital display built into a sign.
Mounting and wall terms
How letters and panels attach to your wall, and what each wall needs.
- Direct (flush) mount
- Direct mounting fastens each letter straight to your wall.
- Stud mount
- Stud mounting sets threaded rods on the back of each letter into holes drilled in your wall, placed with a paper pattern.
- Spacer
- A spacer is a sleeve on a mounting stud that holds a letter off your wall.
- Standoff (panel hardware)
- A standoff is a round barrel and cap that hold a panel a set distance off your wall.
- Pad mount
- Pad mounting holds a letter a little off your wall with adhesive pads, which are hard to remove later.
- Mounting pattern (template)
- A mounting pattern is a full-size paper layout with every letter and hole marked.
- Penetration
- A penetration is any hole through your wall for a fastener or wire.
- Pass-through (bushing)
- A pass-through is the fitting that protects wires where they go through your wall.
- Sleeve anchor
- A sleeve anchor is an expanding metal anchor for concrete and masonry.
- Toggle bolt
- A toggle bolt has wings that open inside a hollow wall.
- Through-bolt
- A through-bolt passes all the way through your wall and is nutted on the inside.
- Z clip
- Z clips are interlocking metal brackets that let a panel hang on your wall and lift off.
- EIFS
- EIFS, exterior insulation and finish system, is foam board with a stucco-like finish, and every fastener through it has to reach the structure and be sealed.
- Clearance
- Clearance is the height from the sidewalk or driveway to the bottom of your sign.
Electrical and listing terms
The circuit, labels and parts an inspector looks at on a lit sign.
- Sign circuit
- A sign circuit is the dedicated circuit of at least 20 amps that the electrical code calls for at each tenant entrance of a commercial building.
- Disconnect
- A disconnect is the switch or breaker that cuts power to your sign for service.
- UL label (listing mark)
- A UL label shows your sign or sign section was built to UL 48, the safety standard for electric signs.
- Section sign
- A section sign ships in parts, such as individual letters, and each part carries its own label.
- Sign specialty electrical contractor
- A sign specialty electrical contractor holds Florida's sign-specific electrical license, which covers your sign up to its last disconnect.
- Retrofit kit
- A retrofit kit is a listed set of LED parts made to relight an existing sign, listed under UL 879A.
- Retrofit label
- A retrofit label on a relit sign names who changed it and with what.
- Relight
- Relighting replaces a sign's lighting, usually fluorescent lamps or neon, with LEDs.
- Reface
- Refacing replaces a sign's face or graphics while the cabinet or letters stay.
- Neon transformer
- A neon transformer, or neon power supply, is the high-voltage unit that lights neon tubes.
- Ballast
- A ballast is the part that runs fluorescent lamps.
- Type A, B and C LED tubes
- Type A LED tubes run on the old ballast, Type B tubes bypass it, and Type C tubes use a separate driver.
Permit, code and lease terms
The words your city, county and landlord use when they review your sign.
- Sign permit
- A sign permit is your city's or county's approval to put up, change or move a sign.
- Building official (AHJ)
- Your building official, or authority having jurisdiction (AHJ), is the city or county office that reviews your permit and inspects your sign.
- Registered design professional
- A registered design professional is a Florida-licensed engineer or architect who seals drawings.
- Sealed drawings
- Sealed drawings are signed and sealed by a Florida-licensed engineer or architect.
- Design wind speed
- Design wind speed is the wind a structure is engineered to resist under the Florida Building Code, a design load rather than a promise about any storm.
- Footer inspection
- A footer inspection is the inspector's check of the hole and reinforcing steel before the concrete is poured.
- Sunshine 811
- Sunshine 811 is Florida's one-call system for marking underground utilities, which state law says to call at least 2 full business days before you dig.
- Notice of Commencement
- A Notice of Commencement is Florida's lien-law notice, posted or filed when construction starts on larger jobs.
- Owner-builder
- An owner-builder is a property owner who pulls the permit and acts as the contractor, which Florida allows on a commercial building they use themselves, not one for sale or lease, for work up to $75,000.
- Sign criteria
- Sign criteria are your landlord's written rules for tenant signs, set in or attached to your lease.
- Multi-tenant sign plan
- A multi-tenant sign plan is a city-approved set of sign rules for a whole shopping center or office park, which every tenant's sign has to follow.
- Comprehensive Sign Program
- A Comprehensive Sign Program is Clearwater's sign plan for a property with several signs or tenants.
- Certificate of Appropriateness (COA)
- In St. Petersburg, a Certificate of Appropriateness is the historic approval you need before exterior changes, including signs, on a local landmark or in a local historic district.
- Right-of-way
- The right-of-way is public land for streets and sidewalks, where a private sign needs permission or is not allowed.
- Encroachment
- An encroachment is anything that extends over or into the right-of-way.
- Visibility (sight) triangle
- A visibility triangle is the clear zone at a driveway or intersection where your sign cannot block drivers' view; St. Petersburg's sign permit checklist shows 10 by 10 feet at driveways and alleys.
- Setback
- A setback is the required distance from your property line or the right-of-way to your sign.
- Nonconforming sign
- A nonconforming sign was legal when it went up but does not meet today's code.
- Amortization
- Amortization is a city's deadline for removing nonconforming signs.
- Abandoned sign
- An abandoned sign is one left with no business or no message, and cities set how long it may stay before it has to be reused, blanked or removed.
- Face change
- A face change replaces a sign face without changing the structure behind it.
- Vesting
- Vesting keeps your project under the code edition that was in effect when your permit application was filed.
- Window sign
- A window sign is any sign on your glass, or hung inside it to be read from outside.
- Temporary sign
- A temporary sign is one your city allows for a limited number of days, usually with its own permit.
Glass, film and interior terms
Window film, wall graphics and signs that help visitors find their way inside.
- Window perf (perforated window film)
- A window perf is printed vinyl with small holes, so people outside see your graphic and people inside see out when it is brighter outside.
- Open area
- Open area is the share of perforated film that is holes; 50/50 means half holes and half print.
- Cut vinyl
- Cut vinyl is single-color lettering cut from adhesive film on a plotter, with no printing and no background.
- Cast and calendered vinyl
- Cast vinyl is thin, stable film made from liquid, and calendered vinyl is thicker film rolled from a solid that shrinks slightly over time.
- Frosted (dusted) film
- Frosted film is translucent film that makes clear glass look etched.
- Overlaminate
- An overlaminate is a clear film over a print that protects it and keeps rain out of perforated film's holes.
- Edge sealer
- Edge sealer is a liquid or tape that seals film edges so water and dirt stay out.
- Butt seam
- A butt seam joins two film panels edge to edge without overlapping.
- Dry application
- Dry application puts film on without soapy water, which perforated film requires.
- Security film
- Security film is thick clear polyester tested to hold broken glass together; it is not a graphic.
- Attachment system
- An attachment system is the hardware or adhesive that ties security film and glass to your window frame.
- Thermal stress
- Thermal stress is uneven heating of glass that can crack it, and dark or printed films make it worse.
- Wall graphic
- A wall graphic is printed adhesive film applied to a painted wall.
- Annealing
- Annealing heats plastic parts to relieve stress before they are cemented or painted.
- Wayfinding
- Wayfinding is planning and signing a place so people can find where they are going.
- Decision point
- A decision point is a spot where a visitor has to choose a direction, such as an entrance or a hallway split.
- Directory
- A directory lists tenants or departments and where to find them.
- Tenant strip (insert)
- A tenant strip is a removable piece of a directory that carries one tenant's name.
- Directional sign
- A directional sign uses arrows to point visitors to where they are going.
- Identification sign
- An identification sign names a place, such as a building or a room.
- Suite number
- A suite number is the unit number for one tenant space, shown at the door or on the glass.
- Address identification
- Address identification is the street number on your building, and the Florida Building Code sets a minimum size and contrast for it.
ADA sign terms
Room signs with raised letters and braille, and the words architects use for them.
- Tactile sign
- A tactile sign has raised characters and braille that can be read by touch.
- Grade 2 braille
- Grade 2 braille uses contractions for common words, and the 2010 ADA Standards call for it.
- Permanent room or space
- A permanent room or space is one whose use is not likely to change, such as a restroom or a numbered office.
- Latch side
- The latch side is the side of a door with the handle and latch, where a tactile sign goes.
- Pictogram field
- A pictogram field is the area, at least 6 inches high, that holds a pictogram, with the raised text below it.
- Visual characters
- Visual characters are printed or applied letters read by sight, with rules for contrast and size.
- Non-glare finish
- A non-glare finish is a matte or low-sheen surface that does not reflect light into a reader's eyes.
- ISA
- The ISA, International Symbol of Accessibility, is the wheelchair symbol used at accessible parking, entrances and restrooms.
- Photopolymer
- Photopolymer is a light-sensitive plastic plate that hardens where UV light hits it, leaving raised letters once the rest is washed away.
- Raster braille
- Raster braille is made by pressing small spheres into drilled holes in a sign plate.
- Sign schedule
- A sign schedule is the architect's list of every sign, its message and its location.
Temporary sign terms
Banners, A-frames and yard signs.
- Banner
- A banner is a printed flexible sign hung by its edges.
- 13 oz scrim vinyl
- 13 oz scrim vinyl is the standard banner material, with a woven polyester core.
- Blockout vinyl
- Blockout vinyl is heavier opaque banner material for printing on both sides.
- Mesh banner
- A mesh banner has small holes that let wind through.
- Grommet
- A grommet is a metal ring set in a banner's edge for tying it up.
- Hem
- A hem is the folded, reinforced edge of a banner.
- A-frame (sandwich board)
- An A-frame is a folding two-sided sidewalk sign.
- Well nut
- A well nut is a rubber-sleeved fastener that leaves a threaded hole for changing panels.
- Corrugated plastic
- Corrugated plastic, often sold as Coroplast, is lightweight twin-wall sheet used for yard signs.
Vehicle lettering terms
We also do vehicle graphics, and these are the words that come up.
- Partial wrap
- A partial wrap is printed film covering part of a vehicle and blending into the paint.
- Full wrap
- A full wrap is printed film covering every painted panel of a vehicle.
- Post-heating
- Post-heating sets installed film with heat so it does not lift from curves and recesses.
- Rear window perf
- A rear window perf is perforated film on a back window that shows a graphic outside and lets the driver see out.
- USDOT number
- A USDOT number is the carrier identification number that commercial vehicles in interstate commerce display with the carrier's name.
- GVWR
- GVWR, gross vehicle weight rating, is the maximum loaded weight the manufacturer sets for a vehicle.
Not sure what your sign is called? Send Tom a photo.
A photo of your sign, or of a sign you like, is enough to start.

