Hit Signs

Window perfs

Window perfs are printed graphics you can see out through.

We print your school or business graphic on perforated film, so people outside see your colors and name while the people inside can still see out in daylight. Send Tom Coletta, who owns Hit Signs, a photo of your windows.

Call Tom 727-370-5060
Shown
Bay Point Elementary
Based in
St. Petersburg, Florida
Covered walkway windows at a school printed with WELCOME TO BAY POINT and a panther mascot
We printed Bay Point Elementary's welcome across its covered walkway windows, so families walking up from the parking lot see the school's name and colors.

Window perfs work by light.

Window perf is printed vinyl full of small holes, with your picture on the front and a black adhesive layer behind. Whichever side of your glass is brighter sees the picture, and the darker side looks through the holes.

That's why perfs work on a sunny school day. Outside is brighter, so families in your parking lot see your mascot, and your office staff see out to them. After dark, with your lights on inside, people outside may see in.

Switch between day and night to see who sees through your perfs.

From outsideBrighter side: sees your pictureFrom insideDarker side: sees out through the holes
How see-through film works (drawing)On a sunny day outside is brighter, so people in your parking lot see your picture and your staff inside see out through the holes.

More holes means a clearer view out and a softer picture.

Perforated film is named by how much of it is print and how much is holes.

50/50
Half the film is holes. It gives the clearest view through, and Avery Dennison recommends it for vehicle windows.
60/40
40 percent of the film is holes. It gives a stronger picture and keeps one-way viewing on building windows. 3M's IJ67, a 5.9 mil vinyl, uses this pattern.
65/35
35 percent of the film is holes. It gives the strongest picture and the least view through, for windows that stay put.
70/30 and 80/20
These patterns are also sold. Less open area means more print and less view through.

Here is what perfs do at a school, and what they don't.

What they do

Perfs show your school's name, colors and mascot from outside, let daylight in, let people inside see out, and limit how much of a room can be seen from the brighter side.

What they don't do

Perforated film is a printed graphic film. The makers' bulletins describe graphics and view-through, not impact or security performance. On hallway glass, or at night with your lights on inside, the one-way effect weakens or reverses, and a perf does nothing to slow anyone coming through the glass.

If you need security

Security window film is a separate, thick polyester product tested to impact standards such as ANSI Z97.1 and 16 CFR 1201 and to blast standards such as ISO 16933 and ASTM F1642, sometimes tied to the frame with an attachment system. Even security film holds broken glass together without strengthening the frame, anchors or hardware, which is why ASTM F3561 tests the whole glazing system.

If you need glass that holds together when it is struck, talk to a security film specialist who can show you test reports for the product they recommend. See signs for schools for the graphics side.

Plan to replace printed perfs.

3M rates IJ67 for about one year, unprinted and unprotected, flat on a vertical outdoor surface. Avery Dennison rates its perforated films for one year printed and two or three years unprinted, and Clear Focus sells an economy grade rated up to 1 year and a longer-life grade up to 3.

Removal depends on the film. IJ67 comes off within its rated life with no heat or chemicals. Overlaminated perforated film comes off with a heat gun, a razor to lift the corner, a low pulling angle and adhesive remover, taking care not to overheat or crack the glass. Anti-reflective or abrasion-resistant glass coatings may be affected.

Slide to see Bay Point Middle School's front windows before and after.

Bay Point Middle School storefront windows printed with the school name and FALCONS RISE
Clear school windows and a glass door under a covered walkway, with no graphics on the glass
BeforeAfter
We printed Falcons Rise, the school's name and its four values of respect, integrity, safety and excellence across Bay Point Middle School's front windows.

Inside your building, both sides are lit.

On interior glass, expect more see-through and a softer picture. Perfs there suit office windows onto a lobby or hallway, where you want your branding more than privacy.

Interior office window printed with BPE Is The Place To Be and a panther, with office furniture visible through the print
We printed BPE Is The Place To Be on Bay Point Elementary's office window. With lights on both sides, the office still shows through the print.

On a storefront, perfs carry your picture while you keep your view of the street.

A gym, studio or shop can run one photo across every pane and still see out during the day.

In St. Petersburg, unlit window signs can cover up to half of your total window glass without a permit, and lit window signs count against your wall sign allowance. A perf mural with your logo or business name counts as a window sign under that limit, not exempt artwork; a picture with no logo or business text may count as artwork, so ask the city about that case. Tampa allows window signs on up to a quarter of your glass.

St. Petersburg's limit comes from its sign code, and other cities set their own. Sign codes change, so confirm the current rule for your property with your city, or ask Tom, before you cover most of your storefront.

These details decide whether your perfs look clean and stay put.

Printing
Ink also lands in the holes and the backing, so a print looks rough until its liner comes off. Ink coverage is limited, and prints dry before lamination; Avery Dennison asks for 24 to 72 hours.
Laminate
Avery Dennison says printed perforated film needs an overlaminate or clear coat. An optically clear laminate also keeps rain from filling the holes and blocking your view.
Panels
Big windows are printed in panels that butt together at the seams instead of overlapping, and each panel is trimmed before it goes on.
Fit
Your perfs stop short of rubber gaskets and never overlap moldings, where their edges would lose their grip.
Installing
Perfs go on clean glass, with air and glass between 50 and 100 degrees F for IJ67. They go on dry, because water trapped in the holes clouds your view. Each panel is hinged from the top, and its edges are sealed with edge sealer or tape.
Inside or outside
IJ67 is listed for interior and exterior building glass. Outside, the holes are open to rain unless the film is laminated.

Window perf questions

Possibly. With your lights on inside after dark, people outside may see in.

Send Tom a photo of your windows from outside.

Tell us how many panes there are and whether the rooms behind them are lit after dark, or call Tom at 727-370-5060.

Call Tom 727-370-5060