Storefront signs
Opening or rebranding a store? We make your storefront sign to fit your lease and your city's rules.
Your storefront needs a main sign on its wall, and your door and glass need your name, hours and suite number. Send Tom Coletta, who owns Hit Signs, a photo of your storefront and your logo, and we'll match your sign type to your wall, your hours and your landlord's criteria.
- Shown
- Estate Cigars and Social, 1201 4th St S
- Based in
- St. Petersburg, Florida

This is what your storefront needs before opening day.
A storefront usually needs a main wall sign plus lettering on the door and glass. Go down this list so nothing is missing when you open.
| Piece | What it does | Read more |
|---|---|---|
| Main wall sign | Carries your name on your fascia as channel letters, dimensional letters, a cabinet or a flat panel. | Channel letters |
| Door and window lettering | Puts your name, hours, phone, website and suite number on your glass. | Window graphics |
| Coming-soon graphic | Carries your name on your glass while your permanent sign is made. | Window graphics |
Start with your lease, because your landlord's criteria can decide more than your city does.
In a managed plaza, your landlord's sign criteria often set your sign type, size, colors and lighting before your city sees a drawing. People who write to us rarely mention them, so ask your landlord for the criteria before you choose a sign.
Criteria can be detailed. One published shopping center program requires written landlord approval before anything is made, a set number of drawings, a 10-day review, the landlord's approval stamp before any city permit application, contractor insurance naming the landlord, and 48 hours' notice before installation.
One national landlord requires individual lit letters with a UL listing, a photocell and an exterior switch, bans cabinet signs and exposed lighting, caps your sign at 80 percent of your usable storefront width, and wants letter sizes, a section view, colors, wattage and every wall penetration on your drawing.
Some cities add a public layer. In St. Petersburg, a wall sign in a development with three or more tenant spaces has to fit the center's uniform sign plan.
Landlord sign criteria explains what criteria usually cover and how to read yours.
Your city caps how much sign your wall can carry.
Cities usually tie your wall sign allowance to your building's frontage. In St. Petersburg, your wall signs can add up to 1.75 square feet for every foot of your storefront wall, capped at 48 square feet in neighborhood, corridor residential and IT districts and 150 square feet in the CCT, CCS, RC, EC, IC, DC and IS districts. Measure the width of your own storefront wall, not the whole lot.
For example, 30 feet of storefront gives you 52.5 square feet of wall sign in a CCT or DC district, but only 48 square feet in a neighborhood district. You can split that allowance across several wall signs, as long as the total stays inside it.
How your sign is measured matters too. For individual letters the city draws one simple shape around the whole group, while a cabinet counts its whole face, background and frame included, so letters can fit more of your name into the same allowance.
Your letters can't go over your windows or doors, and if your wall is within 50 feet of a single-family home, or of a lot zoned for one, the city does not allow a sign lit from inside.
These rules come from St. Petersburg's sign code, and other cities set their own. Sign codes change, so confirm the current rule for your property with your city, or ask Tom, before you order.
Your main wall sign needs a permit. St. Petersburg's sign permit checklist asks for an installation plan sealed by a state-certified design professional, with complete mounting details.
Sign permits in St. Petersburg and sign permits in Pinellas County walk through each process.
Open after dark? Your hours decide whether your sign needs light.
Lit signs read farther. In USSC Foundation test track research, internally lit signs were read 40 to 60 percent farther away than externally lit ones. If you close at five, solid letters or a flat panel can carry your name without the electrical work a lit sign brings.


Our channel letters light up Taylor Sam's at 312 3rd St S, St. Petersburg. Switch to night to see the letter faces lit.
Taylor Sam's, St. Petersburg
A lit sign brings electrical work with it.
Every electric sign has to be listed and installed according to its listing. The electrical code calls for a sign outlet at the entrance of each tenant space, on a branch circuit of at least 20 amperes that serves nothing else, and a disconnect within sight of your sign.
In Florida, making, installing and maintaining electric signs is a specialty category of electrical contracting, and that specialty stops at your sign's last disconnect. Some landlords also require a photocell and an exterior switch. See who connects power to your sign.
Choose your wall sign
These four types are the usual choices for a storefront wall. Pick by look, lighting and what your landlord allows, then read more on its page.
| Type | What it is | Lighting | Good to know |
|---|---|---|---|
| Channel letters | Individual letters, each a shallow can with a face and sides | Lit or not lit | Some landlords require individual lit letters. |
| Dimensional letters | Solid letters cut from metal or acrylic | Not lit | Letters at least 1/4 inch thick can be drilled and tapped for mounting studs. |
| Cabinet sign | One box with your whole graphic on a lit face | Lit | A new face can go into the same cabinet later, but some landlords ban box signs. |
| Flat panel | An aluminum composite panel: two thin aluminum skins over a core | Not lit | Rated for indoor and outdoor use; one maker lists it for exterior use up to 5 years. |
Not sure which type fits? Send Tom a straight-on photo of your storefront with your logo, and say what hours you keep.
If the last tenant left a sign behind, part of it may be reusable.
New tenants often inherit a raceway, a cabinet or a pole. People who write to us include a balloon business moving in under the last tenant's raceway, new owners of a pizza restaurant changing their sign, and salons moving into Central Avenue spaces.
A cabinet's face can be replaced without replacing the cabinet. Whether old wiring, LEDs and cans are sound enough to keep depends on their condition, and an older sign that no longer meets your city's code can be limited in what may be changed.
In St. Petersburg, a new face of the same size and material in a legal sign needs no city permit. An older sign that doesn't meet today's code has to come up to code once it is moved or replaced, or once repairs or structural changes cost more than a quarter of its replacement cost. When a business closes, the property owner or tenant has 90 days to reuse its sign, blank it or post "this space available," so ask your landlord when the last tenant left.
Old sign, new tenant walks through each kind of hardware you might inherit.
Your door and windows carry your hours, phone and suite number.
In St. Petersburg, unlit window lettering and graphics can cover up to half of your total window glass without a permit, and lit window signs count against your wall sign allowance. Hours of operation are informational signs, which follow the ADA rules for finish, contrast and character height. Cut vinyl films are rated up to 6 years for colors in an intermediate grade and up to 8 years for black and white in a cast grade, on vertical surfaces in mild climates, and makers shorten those ratings in hotter, sunnier climates. Commercial address numbers need to be at least 4 inches tall with a 1/2 inch stroke. See window graphics and address signs.

Two recent storefronts, seen at night


What to send Tom
These are the files and photos that let us draw and price your storefront sign.
- Your logo file: ai, eps, svg or pdf if you have it.
- A straight-on daytime photo of your storefront.
- A night photo, if you are open late.
- Your frontage or wall width, if you know it.
- Your landlord's sign criteria.
- Your opening date.
- Whether a sign is there now.
What to send Tom shows which photos help most.
Questions about storefront signs
Yes for your wall sign. In St. Petersburg, its installation plan is sealed by a state-certified design professional and shows how your sign mounts. Unlit window lettering covering up to half of your total glass needs no permit there. See sign permits in St. Petersburg.
A lit sign needs a 20-amp sign circuit at your entrance that serves nothing else, and a disconnect within sight of your sign. In Florida, a sign specialty electrical license stops at your sign's last disconnect, so the circuit feeding it usually needs an electrical contractor. See who connects power to your sign.
Permit time depends on your city. In St. Petersburg, once the city asks, you have 10 business days to upload plans or answer its comments. The City of Tampa has 30 days to decide a complete application, and you can ask for up to 45 more. Tell Tom your opening date when you send your photos.
Send Tom your storefront photo and logo.
Attach your photos and logo, tell us when you open, and we send your price and a proof to approve.
- Phone
- 727-370-5060
- tom@hitsigns.com
- Based in
- St. Petersburg, Florida


