Guide
Sign permits in St. Petersburg
We explain which signs need a permit, what your zoning district allows, what goes in your application, how you apply and answer comments, and the extra approval a historic building needs.
- Reviewed
- November 2026
- Codes change
- The city's official pages are linked below.
The permit path in St. Petersburg
A sign permit in the city moves through these steps. Each one links to its section below.
Step 1. Get written approval from your landlord or property owner if you lease your space.
Step 2. Have your installation drawings sealed by a state-certified design professional.
Step 3. Apply through the city's online permit portal and answer review comments within 10 business days.
Step 4. Call 811 before anyone digs for a freestanding sign, then pass the inspections your permit lists.
Nearly every new permanent sign in the city needs a permit first.
St. Petersburg's sign code requires a permit before anyone puts up a sign, except for a short list of exempt signs. That also means your sign can't go up while your permit is pending.
Signs the city exempts
- A new face in a legal sign, when it is the same size and material as the old face and the structure meets Florida's building code and the city's design rules.
- Unlit window signs covering up to half of your total window glass. Lit window signs count against your wall sign allowance instead, and a window graphic with your logo or business name counts as a window sign, not exempt artwork.
- One sign up to 4 square feet hung under your canopy over the sidewalk, at least 8 feet up, for a business at street level.
- A-frames that follow the city's size, placement and hours rules. See A-frame signs.
- For a restaurant or bar, one wall sign up to 4 square feet and one sidewalk sign that follows the A-frame rules.
Banners and other temporary signs need a permit of their own. A banner can be up to 48 square feet and stay up 30 days, and each business can put up temporary signs four times a year.
Sign codes change, so confirm the current rule for your property with the city, or ask Tom, before you order. The city makes the final call on whether your sign is exempt.
The city checks your sign against two rulebooks.
Zoning review checks your sign against the city's sign code: how big your sign is, how tall, where it goes, how many signs you have and how they are lit. Your zoning district sets those limits, so check your district with the city before anyone draws your sign.
Building review checks the structure, the wind design, how your sign attaches and how it is wired, under the Florida Building Code and the National Electrical Code. The city's sign checklist asks for freestanding signs designed for a 145 mph wind load.
If your sign is lit, the application asks for an electrical plan, and your building needs a sign outlet at each tenant entrance on its own 20-amp circuit that serves nothing else (NEC 600.5(A)). Who connects power to your sign explains that split.
What your zoning district allows
Your zoning district sets how much wall sign you get and how tall and large a freestanding sign can be. These limits are for business uses; homes and apartment buildings follow other rules. Check your district with the city before anyone draws your sign.
| Your district | Wall signs, all together | Freestanding sign height | Freestanding sign area per face |
|---|---|---|---|
| Neighborhood (NT, NS, NSM, NMH, NPUD) and corridor residential (CRT, CRS) | 1.75 square feet per foot of frontage, up to 48 square feet | 10 feet | Up to 48 square feet |
| Industrial traditional (IT) | 1.75 square feet per foot of frontage, up to 48 square feet | 10 feet | Up to 64 square feet |
| Corridor commercial traditional (CCT) | 1.75 square feet per foot of frontage, up to 150 square feet | 15 feet | Up to 64 square feet |
| Downtown center (DC) | 1.75 square feet per foot of frontage, up to 150 square feet | 15 feet, one sign | 1 square foot per foot of frontage, up to 48 square feet |
| Corridor commercial suburban (CCS) | 1.75 square feet per foot of frontage, up to 150 square feet | 20 feet | 1 square foot per foot of frontage, up to 64 square feet |
| Suburban center (RC, EC, IC) and industrial suburban (IS) | 1.75 square feet per foot of frontage, up to 150 square feet | 20 feet | 1 square foot per foot of frontage, up to 150 square feet |
Measure frontage as the width of your own storefront wall, not the whole lot. A freestanding sign 6 feet tall or less can sit at a zero setback; over 6 to 10 feet it sits 3 feet back, over 10 to 15 feet 5 feet back, and over 15 feet 10 feet back. In the CCT, CCS, DC, IS and IT districts, a building of four or more stories can add one name sign near the top. These limits come from the city's sign code.
These design rules apply to signs across the city.
Wall signs
- Wall signs can't go over windows, doors or other openings, and they stay at or below the third floor unless another rule allows more.
- You can split your wall allowance across several signs, as long as the total stays inside it.
- Individual letters are measured by one simple shape drawn around the whole group. A cabinet counts its full face, background and frame included.
- In a development with three or more tenant spaces, your wall sign has to fit the center's uniform sign plan.
- A sign that sticks out from your wall at a right angle, more than 6 inches, is a projecting sign. The city treats it as a type of wall sign, and its bottom has to be at least 8 feet off the ground.
Freestanding signs
- Any freestanding sign 10 feet tall or shorter has to be a monument, standing on a solid base at least three-quarters as wide as your sign, all the way up. Dense planting at the base can stand in for the solid base, and a narrower base makes it a pole sign.
- Your freestanding sign has to match your building's materials, colors and finishes and carry at least one more architectural detail from it.
- Every freestanding sign needs planting around its base.
- Every tenant panel in a freestanding sign, including panels added later, has to use the same materials and the same lighting method.
- Near driveways, alleys and street corners the city keeps a clear visibility triangle. The downtown center (DC) and CCT-2 districts are exempt from that rule.
Plans for a whole property
Properties developed under one plan file a uniform sign plan with their sign permits, so their signs match in size, materials and lighting. If a tenant applies, the property owner's written consent goes with the plan.
Lighting
- No wall or freestanding sign within 50 feet of a single-family home, or of a lot zoned for one, may be lit from inside.
- Signs where you can see the bare bulb or light source from off the property are prohibited, except designated historic signs, so ask the city before you plan open-face neon or exposed LEDs.
- A message center can be up to half of its sign's area and no more than 32 square feet, each message holds at least a minute, and it has to dim to the city's brightness limit. It can't be added to a sign that doesn't meet today's code or go on a designated local landmark, and in neighborhood and corridor residential districts each message holds for 24 hours.
Sign codes change, so confirm the current rule for your property with the city, or ask Tom, before you order.
From the city's checklist
What goes in your application
The city's sign permit checklist asks for the items below. Its pages carry no printed revision date, so confirm with the city that you have the current version before you apply.
Site plan
- Your site drawn to scale, with the scale shown.
- Property lines with dimensions, streets and alleys labeled, a north arrow and any easements.
- Parking, where your sign stands in a paved area.
- Existing buildings and every existing freestanding sign, marked to remain or be removed, with setbacks.
- Your proposed signs with their setbacks, and the spacing between signs on one frontage.
- Visibility triangles: 10 by 10 feet at driveways and alleys, 45 by 45 feet at street intersections, and 5 by 5 feet where a sidewalk meets a driveway.
Elevation
- Overall height, cabinet dimensions and the spacing between cabinets.
- Clearance from the lowest cabinet to the ground, and the lettering and graphics.
- For wall signs, a building elevation with your storefront dimensions and every existing and proposed sign, with your unit highlighted in a multi-tenant center.
Sealed drawings and wiring
- Installation drawings sealed by a state-certified design professional, for freestanding and wall signs.
- For freestanding signs, the footer size and type and the steel, designed for a 145 mph wind load.
- For lit signs, an electrical and wiring plan, NEC listing and labeling, and the UL listing.
Approvals
- Copies of any variances or special approvals for your signs.
- A Certificate of Appropriateness if your building is a landmark or in a local historic district.
Each freestanding sign needs its own application. All the wall signs on one building can go on one application.
Wall signs on St. Petersburg storefronts
Lit wall signs like these go on one application per building, with sealed installation drawings and an electrical plan.
How you apply and answer comments
Applications and plans go through the city's online permit portal and electronic plan review. Once the city comments on your plans, you have 10 business days to upload plans or answer the comments, or the city ends your application.
The city is putting in a new permit system, so the portal steps may change. Start from the city's Building Permits page.
The city's permit pages publish no decision time for sign permits, so plan around answering review comments quickly rather than a set number of days.
Keep your permit alive until your sign passes its final inspection. If your permit expires before your sign is finished, the city's sign code treats it as if you never had one.
Scheduling inspections depends on the contractor's license, which the city checks with the Pinellas County licensing board. The city's sign checklist lists Construction Services and Permitting at 727-893-7231.
Who can pull your permit
Florida's sign specialty electrical contractor license covers building, installing, servicing and wiring electrical and non-electrical signs, including their concrete foundations, up to your sign's last disconnect. Work on your building's circuit beyond that point belongs to an electrical contractor, and your building official decides the split.
A building owner can act as the contractor on a commercial building they use themselves, not one for sale or lease, for work up to $75,000, and has to sign the application and a disclosure statement in person (Florida Statutes 489.103(7)). A tenant cannot use that exemption.
Before you order any sign, get in writing who pulls your permit and whether the permit fee and engineering are in your price.
A historic building needs one more approval, and so does a sign over the sidewalk.
If your building is a local landmark or sits in a local historic district, you need a Certificate of Appropriateness before exterior changes, and commercial signs are on the list that city staff review.
The staff application fee is $50, your permits have to be obtained within 18 months of the approval, and applications go to history@stpete.org. The city's Certificate of Appropriateness packet has the form; confirm the review level for your sign with the city's Urban Planning and Historic Preservation staff.
The city also keeps an inventory of signs of historic significance. A sign 40 or more years old can be added to it, and a listed sign is exempt from the city's height, area and location limits.
Signs over the sidewalk
Only the downtown center (DC) and corridor commercial traditional (CCT) districts allow a wall sign to reach over the public sidewalk, and only with the city's minor easement permit. Everywhere else in the city, signs that project over the right-of-way are prohibited.
A projecting sign has to clear the ground by at least 8 feet. For a flat sign over the sidewalk, ask the city what clearance it wants, and ask how far your projecting sign may reach.
Call 811 before anyone digs.
Florida law requires a call to Sunshine 811 at least two full business days before digging, and the locate ticket is good for 30 calendar days (Florida Statutes 556.105).
Ask the city which inspections your permit lists, including the electrical inspection for a lit sign.
After your sign is up, these city rules still apply.
- A damaged sign can't stay damaged for more than 90 days in a row. The city calls a sign damaged when more than a quarter of its structure or face is gone, or its supports are at risk of collapse.
- Once the city sends notice about a poorly kept sign, you have 60 days to put it right.
- A sign counts as abandoned after 90 days with a blank face, or 90 days after its business closes. When a business closes, the property owner or tenant has 90 days to reuse its sign, paint it over, blank the face, turn the face around with the light off, or post "this space available."
- An older freestanding sign that doesn't meet today's code and sits abandoned for a year has to come down before the city will permit a new sign on that property.
- You can maintain an older sign that doesn't meet today's code. Move it, replace it, or spend more than a quarter of its replacement cost on repairs or structural changes, and it has to meet current code.
- Improving or redeveloping your property at a cost of more than half its assessed value can force an older sign up to current code too.
- A sign that went up without a permit can stay only if its owner shows it is lawful, gets an engineer's certification and obtains an after-the-fact permit.
Old sign, new tenant walks through the decision to keep or replace an old sign.
Who usually does what
This is the usual split between sign companies, landlords, engineers and electricians. Get your own split in writing before you order your sign.
| Task | Sign company | You | Landlord | Engineer | Electrician | City |
|---|---|---|---|---|---|---|
| Sign criteria approval | Prepares drawings | Asks for approval | Approves | |||
| Sealed drawings | Coordinates | Seals | Reviews | |||
| Power to your sign | Wires your sign, if licensed | Shows where the circuit is | Runs the circuit beyond your sign's disconnect | Inspects | ||
| Application and fees | Usually files, if licensed | Pays fees under your contract | Files a separate electrical permit, if needed | Issues | ||
| Utility locate | Calls 811 | Marks private lines | ||||
| Inspections | Schedules and attends | Gives site access | Electrical | Inspects |
Short answers
The city's permit pages publish no decision time for sign permits. Once the city comments on your plans, you have 10 business days to answer, or your application is ended.
Not for a face of the same size and material in a legal sign, as long as its structure meets Florida's building code and the city's design rules. A bigger face, a different material or a change to the structure needs a permit.
Not if they are unlit and cover no more than half of your total window glass. Lit window signs count against your wall sign allowance, and a graphic with your logo or business name counts as a window sign rather than exempt artwork.
No. The city's sign code requires your permit before your sign goes up.
No. Your landlord approves your sign under your lease, and the city issues the permit under its codes. You need both.
Yes. The city's checklist asks for installation drawings sealed by a state-certified design professional for both freestanding and wall signs.
A building owner can act as the contractor on a commercial building they use themselves, for work up to $75,000, by signing the application and a disclosure statement in person. A tenant cannot use that exemption.
No. St. Petersburg runs its own building department, as Clearwater, Largo and Seminole do, while the county reviews unincorporated areas and some small towns (Pinellas County building departments).
A St. Petersburg mailing address can sit outside the city, so check which government your property is in. Sign permits in Pinellas County covers the county process.
Send Tom your address and tell Tom what you have in mind.
Tell us your St. Petersburg address, what kind of sign you want and whether a sign is there now.



