Guide
If the last tenant left a sign on your building, part of it may carry your new name.
We walk through raceways, cabinets, poles, monuments and plaza panels one at a time, and explain when keeping an old sign means building one that meets today's code instead.
What did the last tenant leave?
Whether you can reuse old hardware depends on three things: whether it fits and still works, whether your landlord's criteria allow it, and whether your city still allows that kind of sign. Pick what you have.
A raceway on your wall is often the easiest piece to reuse.
A raceway is a painted aluminum box that carries the wiring and power supplies and holds your letters; only its top comes off to reach the parts inside. One wholesaler's raceway is 5.5 inches high by 3.5 inches deep.
New letters bolt to its face, so the old bolt holes and wire entries either match your layout or need sealing: outdoor caulk for openings under 1/2 inch, and a metal patch with screws or rivets and caulk for larger ones.
Power supplies fail more often than LEDs, and some wholesale supplies are rated for dry locations only, so old power supplies are a likely replacement even when the box is sound.
At least one wholesaler leaves its raceway out of its letters' UL listing, so how a reused raceway is listed or labeled needs checking on each job.
Your landlord's criteria may require a wireway, or allow raceways only in some markets, so check before you plan around one.
New letters on an old raceway are still a new sign. In St. Petersburg, the city's sign permit checklist asks for a wall sign installation plan sealed by a state-certified design professional, with complete mounting details.
Your entrance also needs a sign outlet on a 20-amp circuit that serves nothing else, and your sign needs a disconnect. See who connects power to your sign.
Only holes in your wall?
When the last tenant's letters came down, their holes stayed. One national landlord's guide holds tenants and their contractors liable for installation damage, so ask your landlord who seals the old pattern before your letters go up.
Openings under 1/2 inch take outdoor caulk, and larger ones take a metal patch with fasteners and caulk.
A sound cabinet can take a new face.
A cabinet's face can be replaced without replacing its box, which is how landlords re-tenant cabinets.
Measure the retainer opening, the face thickness and the flange, not just the old face, and match the face material.
Whether a face change needs a permit depends on where you are. In St. Petersburg, a new face of the same size and material in a legal sign needs no city permit, as long as its structure meets Florida's building code and the city's design rules. Pinellas County lists a face change as its own permit type. Florida's model administrative rules need no building permit for a face change when the cabinet, structure and equipment inside stay the same, but each city adopts its own version, so ask your building department.
An old fluorescent cabinet can go LED with LED sticks, socket-fit tubes or modules on its back panel, chosen by its depth, face type and sockets. A certified retrofit kit installed to its instructions leaves the original listing intact, your relit sign gets a retrofit label, and many cities require a permit for a retrofit.
One national landlord bans cabinets for new tenants, so an existing cabinet does not mean you may keep one.
An old pole of your own is where the code questions start.
A new cabinet on an old pole only works if the existing steel and footing can carry the new cabinet's wind load, which an engineer has to confirm.
Standing water at the base corrodes poles and anchor bolts, so look at the base before you plan around the pole.
Local codes restrict exposed pole signs and can require new low signs to be monuments, and an old pole sign that no longer meets today's code has limits on what you can change. See grandfathered signs below and monument or pylon.
In St. Petersburg, any freestanding sign 10 feet tall or shorter has to be a monument, so a short pole sign you replace may have to come back as one. The city also doesn't allow a message center to be added to a sign that doesn't meet today's code.
A panel in a shared plaza sign is the simplest change.
In a shared plaza sign, your landlord controls the structure and you supply the artwork for your panel. In St. Petersburg, your panel has to match the others in materials and lighting, and other cities can hold panels to the same standard, so check your landlord's criteria before you order.
See pylon signs and signs for property managers.
A monument or ground sign can take a new face the same way.
A faded monument face can be replaced much like a cabinet face, and our requests include a preschool franchise that wanted exactly that.
Some cities also ask for an address on freestanding signs: Clearwater asks for a 3-square-foot address sign on every freestanding and monument sign.
St. Petersburg requires planting around the base of every freestanding sign, monuments included.
Old monuments follow the same rules for grandfathered signs as pylons do.
Grandfathered signs have limits on what you can change.
Grandfathered is the everyday word, and codes say nonconforming. A nonconforming sign was legal when it went up but does not meet today's code.
Each city's code sets how much of a nonconforming sign you can move, replace or structurally change before your whole sign has to meet today's code, and the limits differ from city to city. The same repair can be allowed in one city and force a new sign in the next.
The quarter-of-replacement-cost line
In St. Petersburg and unincorporated Pinellas, you can maintain a nonconforming sign. Move it, replace it, or spend more than a quarter of its replacement cost on structural work, and it has to meet current code; St. Petersburg counts repairs toward that quarter too. In St. Petersburg, improving or redeveloping your property at a cost of more than half its assessed value can force an older sign up to current code too (St. Petersburg's sign code).
Don't confuse that line with St. Petersburg's damaged-sign rule, which also uses a quarter: the city calls a sign damaged when more than a quarter of its structure or face is gone, or its supports are at risk of collapse.
Unincorporated Pinellas also sets a deadline for older signs to meet current rules, with exceptions, so ask Pinellas County Zoning how it applies to your sign before you plan work on it (Pinellas County's sign code).
Clearwater's sign permit application has applicants acknowledge that nonconforming signs are subject to amortization, a deadline for removing them, and that money spent on them, including changing their message, does not create a right to keep them.
Ask your city's zoning office these questions before you commit to a repair:
- Is my sign nonconforming, and is there a permit on record for it?
- Which of my planned changes count as moving, replacing or structurally altering it?
- If your code measures changes against replacement cost, how do you calculate it?
- Does a new face count as a change, or is it exempt?
Empty signs have deadlines too
Ask your landlord when the last tenant left, because the clock may already be running.
- In St. Petersburg, a sign counts as abandoned after 90 days with a blank face, or 90 days after its business closes. When a business closes, the property owner or tenant has 90 days to reuse its sign, paint it over, blank the face, turn the face around with the light off, or post "this space available."
- In St. Petersburg, an older freestanding sign that doesn't meet today's code and sits abandoned for a year has to come down before the city will permit a new sign on that property.
- St. Petersburg also prohibits signs left damaged for more than 90 days in a row, and signs left poorly kept for 60 days after the city sends notice.
- In unincorporated Pinellas, a sign for a business that has been gone more than 90 days in a row counts as abandoned, and abandoned signs are not allowed.
No permit on record
In St. Petersburg, a sign that went up without a permit can stay only if its owner shows it is lawful, gets an engineer's certification and obtains an after-the-fact permit. Before you build around an old structure, ask the city whether it has a permit on record for it.
Sign codes change, so confirm the current rule for your property with your city or county, or ask Tom, before you order.
Settle these with your landlord first.
Your lease decides who owns the hardware the last tenant left and who pays to take it down. Ask in writing:
- Who owns the existing sign hardware, and may you reuse or remove it?
- Do your current criteria allow the existing type, such as a cabinet or a raceway?
- Who seals old holes and repairs your wall, now and when you move out?
- Where does your landlord bring power for signs?
- When did the last tenant leave?
See landlord sign criteria. This guide explains common lease terms; it is not legal advice about your lease.
What to send Tom
These photos and details show Tom Coletta, who owns Hit Signs, what the last tenant left and what your new name needs.
- A close photo of the hardware, and one from the street.
- A photo of any label on the cabinet or raceway, because listing and retrofit labels show who built or relit it.
- Your new business name and your logo file.
- Your landlord's criteria, if you lease.
- How long the space has been empty.
For other kinds of jobs, see what to send Tom.
Short answers
Often, if your letters fit it and the parts inside still work. It is still a new sign, so it needs a permit; in St. Petersburg that means a sealed installation plan for your wall sign.
Often, if the cabinet is sound and your landlord still allows cabinets. Whether a face change needs a permit depends on your city, and Pinellas County lists it as its own permit type.
It means your sign is nonconforming: legal when it went up, but not under today's code. In St. Petersburg and unincorporated Pinellas, moving or replacing it, or spending more than a quarter of its replacement cost on structural work, means it has to meet current code, so ask the zoning office before you plan a repair.
Maybe not. In St. Petersburg, an older freestanding sign that doesn't meet today's code and sits abandoned for a year has to come down before the city will permit a new sign on that property. Ask your city before you plan around it.
Letters on a raceway come down more easily than letters mounted one by one. Your new building still means a new permit and your new landlord's criteria.
Send Tom a close photo of what the last tenant left.
Add one photo from the street, any label you can see, your new name and whether you lease or own.



