Hit Signs

Letter size calculator

Find how tall your channel letters need to be to read from the road in front of your building.

Our calculator uses the US Sign Council's formula for wall signs: tell it how many lanes pass your building and how far your wall sits from the curb.

Call Tom 727-370-5060
Letter heightCurb to your wallLanes

Work out your minimum letter height.

Choose who reads your wall. For drivers passing your building, enter the lanes on your road and the distance from the curb to your wall. For people facing your wall from a parking lot, a plaza walkway or across the street, enter how far away they stand and how busy the setting is.

Your letters are
At night your letters are

Suggested minimum letter height

10 in

(2 lanes x 10 + 30 ft from the curb to your wall) / 5 = 10.0 in before adjustments.

  • A wall sign that runs parallel to traffic usually needs taller letters than a sign facing oncoming drivers.

The result is a minimum height in inches, and the answer updates as you type. Your city, your landlord and the limits of how channel letters are made usually set the maximum, so read those below before you settle on a size.

Here is the formula in plain words, with worked examples.

The US Sign Council's wall-sign formula takes the number of lanes, multiplies it by 10, adds your distance from the curb in feet, and divides by 5. The answer is a minimum letter height in inches. On a four-lane road with your wall 60 feet back, that is (4 x 10 + 60) / 5 = 20 inches, or 23 inches if your name is in all capitals.

Road in front of your buildingCurb to your wallLetter height
2 lanes30 ft10 in
2 lanes60 ft16 in
4 lanes60 ft20 in
4 lanes100 ft28 in
6 lanes150 ft42 in
6 lanes300 ft72 in

Calculated from Equation 1 in the US Sign Council Foundation's published standards for on-premise signs. For people facing your wall, the Council uses a Legibility Index instead: the distance in feet at which one inch of capital letter height can be read. The average is 30 feet per inch, about 25 in a busy town setting and about 20 where many signs compete. The International Sign Association's rule of thumb, about 1 inch of letter height for every 25 feet, makes a quick cross-check.

Capitals, lighting and script each change your answer.

All capitals

A name set in all capitals needs letters about 15 percent taller to read as well as capitals and lower case. The calculator adds that 15 percent when you choose All capitals.

Lit from inside or outside

Lighting is a size decision too. In US Sign Council test track research, signs lit from inside were read 40 to 60 percent farther at night than signs lit from outside, and a sign lit from outside needs to be about 40 percent larger to match. The calculator adds that 40 percent when you choose Lit from outside. Without any lighting, your letters read by daylight and by whatever outside light falls on your wall.

Script

Script is harder to read from a distance. The International Sign Association advises against script where legibility matters, so if script is your brand, keep it and size it up. Logo and script letters explains the stroke widths script needs.

A wall facing along the road

Drivers read a wall sign at an angle as they pass. The International Sign Association says a sign parallel to the road needs to be at least 70 percent larger than one facing traffic, which is why wall letters run larger than projecting signs.

Taylor Sam's white channel letters and round logos on a dark fascia band above two wood-look canopies, by day
This view of our channel letters at Taylor Sam's on 3rd Street South shows them from the sidewalk, at the angle people walking up read them.Taylor Sam's, St. Petersburg

The formula gives a minimum, and three things usually set the maximum.

Check all three before you choose a size. Any one of them can cap your letters below what the road alone would allow.

Your city's allowance
Your city's sign code caps how much wall sign area you get. In St. Petersburg your wall signs can add up to 1.75 square feet for every foot of your building frontage, capped at 48 or 150 square feet depending on your zoning district. Your permit drawings show your storefront's dimensions and every sign on it, so the city can check your size. For St. Petersburg, see channel letters in St. Petersburg.
Your landlord's criteria
Plaza sign criteria can set letter heights. One national landlord, for example, sets 24 inch letters for spaces under 3,000 square feet and 24 to 36 inch letters above that.
How letters are made
Many wholesale fabricators don't build channel letters under about 8 inches, lit strokes need to be about 1.5 to 2 inches wide, and letters over about 72 inches need their own structure. For small sizes, dimensional letters may suit you better.
Estate Cigars and Social storefront by day, with ESTATE channel letters and a horse-head logo on a dark fascia above a canopy
On Estate Cigars and Social's fascia at 1201 4th St S, our ESTATE letters run much larger than the CIGARS & SOCIAL line under them.Estate Cigars and Social, St. Petersburg

Questions about letter size

The International Sign Association's rule of thumb is about 1 inch of letter height for every 25 feet of viewing distance. The calculator is more precise for drivers, because it counts your lanes and your wall's distance from the curb.

Send Tom your size and a photo of your building.

Add the height from the calculator, your logo and the town or address of your sign.

Based in
St. Petersburg, Florida

Add photos of your building, your logo file and your landlord's sign rules if you have them. Up to 5 files, 10 MB each.

Add more details for Tom (optional)
Best way to reach you (optional)
Is there a sign there now?
Lit or not lit?

How we handle your details