The three wall-sign types, side by side
Channel letters, dimensional letters and cabinet signs all mount on your wall, but each one is built, lit and changed in its own way.
| Question | Channel letters | Dimensional letters | Cabinet sign |
|---|---|---|---|
| How it is built | Each letter is a shallow can with a back, side walls called returns, and a face. | Solid letters are cut, cast or formed from metal, acrylic, PVC or foam. | One enclosed box holds a translucent face with the lights inside. |
| By day | Painted returns and colored faces read as solid letters. | Each solid letter gives your name depth and a shadow. | One panel carries your whole graphic. |
| After dark | Front-lit faces glow, or halo-lit letters wash your wall with light behind them. | Nothing inside lights up, so your letters read by daylight or outside lighting. | The whole face glows, or only your copy glows through a routed metal face with push-through letters. |
| Power at your entrance | Lit letters need a dedicated 20-amp sign circuit at your entrance. | Unlit letters need no sign circuit. | A lit cabinet needs a dedicated 20-amp sign circuit. |
| When you rebrand | Sound letter cans can take new faces, or you replace your letters. | You replace your letters. | A new face goes into the same box. |
| Landlord rules | One national landlord's guide requires individual interior-lit letters. | They fit where your criteria allow unlit signs. | The same guide bans lit cabinets and box signs. |
| Inside a lobby | They can go indoors too, and lit ones must be listed. | They are the usual reception logo wall. | They are rarely used indoors. |
Words like return, raceway and push-through are defined in our sign glossary.
Are you open after dark?
Decide lighting first, because it changes the type. In the United States Sign Council Foundation's test-track research, drivers read internally lit signs 40 to 60 percent farther away than signs lit from outside. If your customers find you by day, non-lit letters or outside lighting may be all you need. Some cities limit lit signs next to homes, so check your city's code if your storefront sits beside houses. See front-lit channel letters.


Your landlord and your city may choose your sign type for you.
Landlord sign criteria often decide the type before you do. One national shopping center landlord's published guide asks for individual interior-lit letters with a UL rating, a photocell and an outside on/off switch. It bans cabinets and exposed lighting, caps your sign at 80 percent of the usable storefront width, and sets letter heights by the size of your space: 24 inches under 3,000 square feet, and 24 to 36 inches above that.
Your city then reviews your sign against its own code, which limits how much sign area your wall can carry. In St. Petersburg, the city's sign permit checklist asks for a wall sign installation plan sealed by a state-certified design professional, with complete mounting details.
Read our guides to your landlord's sign criteria and sign permits in St. Petersburg before anyone draws your sign. If you lease, send Tom Coletta, who owns Hit Signs, a copy of your criteria with a photo of your building.
Will you rebrand, or will tenants change?
A cabinet keeps its box when your name changes, so a rebrand can mean a new face instead of a new sign. Landlords re-tenant cabinets the same way.
Whether a face change needs a permit depends on where your sign is. Pinellas County lists face changes as their own permit type. Florida's model administrative rules, which each city adapts, need no building permit for a face change when the cabinet, structure and equipment inside stay the same, so ask your building department before you order.
Channel letters change with new faces on sound letter cans, or with new letters. If an old raceway or cabinet is already on your wall, read old sign, new tenant before you plan around it, because cities limit how much of an old sign that no longer meets today's code can be replaced.
What is your wall made of?
Halo-lit letters need a smooth, light-colored wall or a backer panel behind them, because your wall's color tints the halo.
EIFS, the foam board with a stucco-like finish on many newer buildings, needs fasteners that pass through the foam into the structure, with every hole sealed. A raceway puts fewer holes in your wall than letters mounted one by one.
Dimensional letters on studs handle rough stone or fluted block and can come off later without damage. Adhesive pads only suit flat, non-porous walls and are hard to remove.
See raceway or direct mount for how each mounting method meets your wall.
Inside your lobby, dimensional letters are the usual choice.
Dimensional letters and laminate letters make the usual reception logo wall. PVC and foam-core laminate letters are rated for indoor use only, so they are the wrong material outside.
Company names and logos are exempt from the ADA's visual and tactile sign rules, so a lobby logo is not an ADA sign. Room and restroom signs are covered; see ADA signs.
See our lobby and office signs for logo walls and room signs.
Metal, acrylic or something lighter?
One letter maker's value lines put PVC and foam at the low end of cost, acrylic and formed plastic in the middle, and flat cut and cast metal at the top.
Metal gives a heavier, architectural look with brushed or patina finishes. Acrylic is lighter and comes in solid colors. Whichever you choose for an outside wall, check that the exact product is rated for outdoor use.
Paint, printed vinyl and stock vinyl sold under the same color name can look different side by side, so compare samples before you approve your colors.
What drives your price for each type
These are the factors that move your price. See what drives channel letter cost for the full list.
- Channel letters
- Letter count and height, front-lit or halo-lit, trim cap or trimless faces, return depth and finish, mounting method, your wall and access to it, engineering and permits, and whether a sign circuit already waits at your entrance.
- Dimensional letters
- Material and thickness, letter count, finish, mounting method, and your wall and access to it.
- Cabinet signs
- Size and depth, one face or two, face type and graphics, LED count and mounting. For a new face in an old cabinet, whether the old retainers can be reused.
Five questions that narrow your choice
Answer these for your building, then send Tom what you found with a photo of your wall.
| Your answer | Types that fit | Why |
|---|---|---|
| I'm open after dark | Lit channel letters or a lit cabinet | Internally lit signs read farther at night than signs lit from outside. |
| My sign goes inside | Dimensional or laminate letters | They are the usual lobby logo wall, and foam-core laminates are made for indoor walls. |
| My lease has sign criteria | Whatever your criteria allow | One national landlord's criteria require individual lit letters and ban cabinets. |
| I'll rebrand or change tenants soon | A cabinet, or channel letters with replaceable faces | A cabinet takes a new face in the same box. |
| My storefront sits next to homes | Non-lit letters or outside lighting, where your code limits lit signs | Some cities limit internal lighting near homes, so check your city's code first. |
Other signs that might fit your building
- Storefront signs
- A flat panel sign suits a daytime office or shop, and our storefront page covers your whole front: wall sign, windows and door.
- Window graphics
- Lettering and graphics on your glass put your name at eye level for people on foot.
- Freestanding signs
- If your building sits back from the road, a monument or pylon sign may read better than anything on your wall.
- Logo and script letters
- The International Sign Association advises against fancy or script lettering where legibility matters, so script logos are usually kept for brand reasons and sized up.
Not sure which type fits your wall? Send Tom a photo of your building.
Tell us your hours and whether you lease, and attach your logo.




