Hit Signs

Guide

Your lot, your city's code and your drivers decide between a monument sign and a pylon sign.

We explain what each one is, how codes limit them, where on your lot they can stand and how far away drivers can read them, so you can choose the right freestanding sign for your site.

Call Tom 727-370-5060
A crane lifts the Mantione and Mantione pylon cabinet while two men watch from the lot
Mantione and Mantione's pylon cabinet is our job on Duhme Road in Seminole, set here by crane.

Pylon, pole sign, monument: what each one is

Trade names and code names differ. Some codes say freestanding or ground sign instead of pylon, and some define a monument by how much of its width sits on a solid base, so check your city's definitions.

Pylon sign
A pylon is a tall freestanding sign with one or more cabinets on columns or a solid pier, made to be read from the road.
Pole sign
A pole sign is the plain version of a pylon, with its cabinet on exposed poles.
Monument sign
A monument is a low sign on a solid base at ground level, set near a driveway or entrance.
Post-and-panel sign
A post-and-panel sign holds its panels between posts, with open space below. A code that defines a monument by its solid base does not count it as one: St. Petersburg's needs a solid base at least three-quarters as wide as the panel it carries, all the way up, and calls anything narrower a pole sign.

Your city may decide for you.

Local codes limit freestanding sign height, face area and setback by zoning district, and some require low signs to be built as monuments on a solid base, in materials that match your building. Your district can settle the choice before anyone draws your sign.

In St. Petersburg, any freestanding sign 10 feet tall or shorter has to be a monument, and dense planting at its base can stand in for the solid base. Every freestanding sign there matches your building's materials, colors and finishes. Tampa wants one pier at least 30 inches wide or two at least 12 inches wide under a freestanding sign, finished to match your building, which rules out a bare pipe. These rules come from St. Petersburg's and Tampa's sign codes.

Your mailing city is not always your permitting city. Pinellas County lists every building department in the county, and your parcel's tax district on the Pinellas County Property Appraiser's site tells you whether it sits inside a city. See sign permits in Pinellas County.

Ask your city's zoning office for the height, area and setback limits in your district before you settle on a sign.

See what your city allows for a freestanding sign.

Pick St. Petersburg, unincorporated Pinellas or Tampa to see the height, face size, setback and base rules in its sign code. For Largo, Clearwater, Seminole and unincorporated Hillsborough, send Tom the address of your sign so the rule for your parcel can be checked. Sign codes change, so confirm the current rule for your property with your city or county, or ask Tom, before you order.

St. Petersburg

Height
Freestanding signs top out at 10, 15 or 20 feet, depending on your zoning district.
Face size
Each face can be 48 to 150 square feet, depending on your district. In many districts it is 1 square foot per foot of frontage, up to that cap.
Setback
The taller your sign, the farther back it sits: 0 feet up to 6 feet tall, 3 feet over 6 to 10 feet, 5 feet over 10 to 15 feet, and 10 feet over 15 feet.
Monument
Any freestanding sign 10 feet tall or less must be a monument, on a solid base at least three-quarters as wide as your sign. Dense planting around its base can stand in for the solid base.
Sight lines
Near driveways and corners the city keeps a clear triangle with nothing over 36 inches tall: 10 feet at driveways and alleys, 45 feet at street corners and 5 feet at sidewalks. Downtown (DC) and CCT-2 are exempt.
Drawings
The city's sign permit checklist asks for freestanding sign installation drawings sealed by a state-certified design professional.

Codes change, and your city or county decides your permit. These figures follow each code as published in November 2026, so confirm your zoning district with your building department.

Will drivers read it?

The United States Sign Council Foundation found that copy 5 feet or less above the ground can be blocked by other vehicles, and it recommends copy no lower than 7 feet where drivers are your audience. That can conflict with low height limits on monuments.

Its average legibility index is 30 feet of reading distance for each inch of letter height, falling toward 20 feet per inch in busy driving. See how tall your letters should be.

Lighting limits vary too. Clearwater's sign permit application caps commercial sign lighting at 5 foot-candles. In St. Petersburg, a sign within 50 feet of a single-family home, or of a lot zoned for one, can't be lit from inside, and in Tampa a lit sign can't throw more than 1 foot-candle of light 4 feet from its base.

Visibility triangles and setbacks decide where your sign can stand.

Visibility triangles keep a sign out of drivers' view at driveways and intersections. St. Petersburg's sign permit checklist shows them at 10 by 10 feet at driveways and alleys, 45 by 45 feet at street intersections, and 5 by 5 feet where a sidewalk meets a driveway.

Setbacks set how far your sign stands from the property line or the right-of-way. Clearwater's application asks that freestanding signs stand at least 5 feet from any property line, and other cities set their own distances.

In St. Petersburg, a sign 6 feet tall or shorter can sit at a zero setback; over 6 to 10 feet it sits 3 feet back, over 10 to 15 feet 5 feet back, and anything taller 10 feet back. The city's visibility-triangle rule does not apply in its downtown center (DC) and CCT-2 districts. Unincorporated Pinellas keeps freestanding signs at least 3 feet from the right-of-way, 10 feet for a sign over 75 square feet in C-2, E-2 and CP zones, and follows the state's sight-line standards or its traffic engineer's.

St. Petersburg's checklist also asks your site plan to show every existing freestanding sign on your property, and whether it stays or comes down.

Both need sealed engineering, a permit and inspections.

Monuments and pylons are both freestanding signs, and Florida's building code covers the wind loads they must resist. St. Petersburg's checklist asks for an installation plan sealed by a state-certified design professional, showing the footer size and type and the steel, designed for a 145 mph wind load, with a separate application for each freestanding sign.

Clearwater asks for a structural drawing signed and sealed by a licensed Florida engineer or architect for signs over 32 square feet. On permits Pinellas County issues, its inspectors check every monument, pylon and pole sign footer in person before the concrete is poured. In Tampa, the foundation inspection comes once the hole is dug, the forms are up and the rebar is in place.

Both kinds need care at the base. St. Petersburg requires planting around the base of every freestanding sign, and Tampa asks for grass and weeds kept cut for 10 feet around a ground sign.

Before anyone digs, Florida law calls for a Sunshine 811 locate at least 2 full business days ahead, so underground utilities are marked.

See our guides to sign permits in St. Petersburg and sign permits in Pinellas County.

Pylons and monuments are built in different ways.

Pylons

A pylon's steel columns sit in a drilled caisson or a slab footing that an engineer chooses for your sign's size, height and soil. The pole is set in concrete or bolted to anchor bolts cast into the footing.

The cabinet is aluminum with removable retainers, and large faces are pan-formed so the rim stiffens the edge. Polycarbonate faces resist breaking better, while acrylic has historically held its color better. A boom truck or sign crane lifts the column and cabinet into place.

Monuments

Monuments are built from block and stucco, brick or stone veneer, a welded frame skinned in aluminum with routed or push-through letters, or a foam core with a hard coat. They sit on a spread footing in stable soil, or on a concrete pier in others.

Masonry monuments are built in place, while aluminum and foam monuments are often built in a shop and set as one piece.

A plaza sign carries a header panel and a panel for each tenant.

A multi-tenant pylon or monument carries a header panel with the center's name and stacked tenant panels below it. Some cities hold every panel in a freestanding sign to matching materials and lighting, and some approve one sign plan for a whole center, so check before you add or change a panel.

In St. Petersburg, every tenant panel in a freestanding sign, including panels added later, has to use the same materials and lighting method, and properties developed under one plan file a uniform sign plan with their sign permits. Tampa lets a shared sign plan rearrange signs across parcels, but it can't add to the total the standard rules allow.

See signs for property managers and landlord sign criteria.

Your street number can go on your sign.

The Florida Building Code sets rules for address numbers that can be read from the street, and some cities ask for an address on freestanding signs. Clearwater asks for a 3-square-foot address sign on every freestanding and monument sign, not counted in your sign area.

In unincorporated Pinellas, putting your street number on your freestanding sign adds 8 square feet a face to your allowance, as long as that space carries only your address. In Tampa, one address sign up to 3 square feet in a non-residential district comes on top of your other sign allowance.

Elysian's ground sign carries its street number down the side of its frame. See address signs.

Already have an old pole sign?

A nonconforming sign was legal when it went up but does not meet today's code. Cities limit how much of one you can move, replace or rebuild before your whole sign has to meet today's code, and the limits differ from city to city.

In St. Petersburg and unincorporated Pinellas, moving or replacing an older sign, or spending more than a quarter of its replacement cost on structural work, means it has to meet current code. Tampa doesn't allow an older sign's structure to be altered to prolong its life. Unincorporated Pinellas also sets a deadline for older signs to meet current rules, with exceptions, so ask Pinellas County Zoning how it applies before you plan work (Pinellas County's sign code).

An old pole and footing also have to carry a new cabinet's wind load, which an engineer has to confirm. Read old sign, new tenant before you plan around an old pole.

What drives your price

These are the factors that move your price for a monument or pylon sign.

Height and size
Overall height and cabinet size set the steel, the footing and the lifting equipment.
Structure
One pole or two, pole covers, or a masonry or aluminum pier where your code asks for one.
Faces and panels
One face or two, the number of tenant panels, and acrylic or polycarbonate faces.
Lighting
Lit or unlit, and the electrical run from your building to your sign.
Base
Block and stucco, veneer, aluminum or foam for a monument base.
Engineering and permits
Sealed drawings, soil conditions, permit fees and any extra permits your city asks for.
Your site
Paving, power lines, buried utilities and how easily equipment reaches your sign.
An old sign
Taking down an old sign and its footing before your new one goes up.

Monument and pylon, side by side

QuestionMonument signPylon sign
HeightLow, at ground levelTall, on columns or a pier
BaseA solid baseColumns, covered poles or a solid pier
Where codes push youLow signs on solid bases in matching materialsHeight and area limits by district
Reading distanceCopy near the ground can hide behind parked vehiclesCopy can sit at 7 feet or higher, where sign researchers recommend it
Several tenantsStacked panels on the faceA header panel above stacked tenant panels
EngineeringSealed drawings and a footer inspectionSealed drawings and a footer inspection
Typical materialsBlock and stucco, veneer, aluminum or foamSteel columns, an aluminum cabinet, acrylic or polycarbonate faces
Setting itBuilt in place, or shop-built and set as one pieceLifted by boom truck or sign crane
From our jobsElysian's post-and-panel ground sign is our closest exampleMantione and Mantione and Beach Plaza

Send Tom a photo of your lot from the road and your address.

Tell us whether a sign stands there now and how many businesses share your property.

Call Tom 727-370-5060