Hit Signs

Property managers and plaza owners

We make tenant panels and the plaza signs that hold them for your property.

Tenants move in and out, and every change shows on your road sign. Send Tom Coletta, who owns Hit Signs, a photo of your plaza sign and tell us which positions are changing.

Call Tom 727-370-5060
Shown
Beach Plaza tenant panels
Based in
St. Petersburg, Florida
An installer in a boom lift basket works on tenant panels at the top of the Beach Plaza pylon
We applied tenant lettering to Beach Plaza's pylon panels from a boom lift, with the header and the other tenants' panels left in place.

Here is what happens on your property, and what we make for it.

Property managers write to us about the same few situations, often for more than one sign or more than one property at a time.

What happens on your propertyWhat we make
A new tenant moves into one of your spaces.New channel letters for your tenant's sign band, and a new panel for your plaza sign.
A tenant leaves and its position goes blank.A blank or space-available face for the empty position, then your next tenant's panel when the space is leased.
Delivery drivers can't find the right building.Entrance and building number signs, so each door is easy to find.

A tenant panel change is routine when the new face fits and matches its neighbors.

A new face has to fit the opening in your cabinet's retainer, so the opening, the face thickness and the flange all get measured, not just the old panel. A face that's trimmed wrong wastes a trip up the pole.

In St. Petersburg, every tenant panel in a freestanding sign, including panels added later, has to use the same materials and the same lighting method as the rest.

Polycarbonate faces break less, and acrylic is stiffer and has historically held its color better. New vinyl next to panels that have aged in the sun will show a color difference, so sometimes the honest answer is to redo several panels at once.

Larger faces need dog strips or hanger bars to stay in the retainer in wind, and face changes should wait for a calm day.

With the cabinet open, it's a good time to check the lamps or LED power supplies and look for water, wasps and debris. When one tenant position goes dark, the cause is usually the lamps, ballasts or power supplies inside, not the face.

Most panel changes are done from a bucket truck or boom lift. Lift operators follow OSHA's aerial lift rules and treat nearby power lines as live.

Whether a panel change needs a permit depends on your city.

Florida's model administrative chapter treats a face change as needing no building permit when the cabinet, structure and internal equipment don't change, but each city adopts its own version. Pinellas County, for example, lists a face change permit for existing signs among its sign permit types, so a panel swap is not automatically permit-free.

In St. Petersburg, a new face of the same size and material in a legal sign needs no city permit, as long as its structure meets Florida's building code and the city's design rules.

If your property is in Clearwater, the city's sign application asks for notarized consent from your property's owner, or a copy of the lease, when anyone else applies.

Replacing lamps counts as minor repair under the same model chapter. A full LED conversion should use a certified retrofit kit, and many cities require a permit for it.

Check with the office that reviews signs at your address before you order. Sign permits in St. Petersburg and sign permits in Pinellas County walk through each process.

An empty position on your sign has a clock.

A blank position on your road sign is a code matter as well as an empty spot. Cities set deadlines for reusing, blanking or removing an empty sign, and an old pole sign that stays empty too long can lose its grandfathered status. The timeline shows the milestones to watch; your city's own rules decide the dates.

  1. Day 0

    The business closes or your sign face goes blank.

    The clock starts when the business on the property stops operating, or when your sign face shows no copy.

  2. Day 90

    Your sign counts as abandoned.

    By now the property owner or tenant puts new copy on your sign, or paints over its face, blanks it, turns it around with the light off, or posts "this space available."

  3. 12 months later

    An old freestanding sign has to come down.

    A freestanding sign that doesn't meet today's code and stays abandoned for 12 months in a row must be removed by the property owner, and the city won't permit a new sign on the property until it is gone.

Vacancy clock in St. Petersburg (drawing)Other places run different clocks. In Tampa, an older sign that doesn't meet today's code has to be removed once its property sits vacant for 90 days, and unincorporated Pinellas County treats a sign for a business that has been gone more than 90 days as abandoned. If a space sat empty before you took it over, its clock may already be running.St. Petersburg sign code, Section 16.40.120

We can make the blank or space-available face for an empty position and your next tenant's panel at the same time.

Damaged and neglected signs run on a clock too.

St. Petersburg prohibits signs left damaged for more than 90 days in a row, and signs left poorly kept for 60 days after the city sends notice. The city calls a sign damaged when more than a quarter of its structure or face is gone, or its supports are at risk of collapse.

In unincorporated Pinellas, the property owner or tenant keeps every sign working and looking cared for, and a sign for a business gone more than 90 days in a row is not allowed to stay.

These rules come from St. Petersburg's sign code and Pinellas County's sign code. Sign codes change, so confirm the current rule for your property with your city or county, or ask Tom, before you plan around a vacancy.

One written set of sign specifications keeps your whole center consistent.

Consistency comes from one written set of specifications for your center: letter heights, colors, materials, mounting and lighting, applied to every tenant. Clearwater calls its version a Comprehensive Sign Program.

St. Petersburg makes it part of your permit. Properties developed under one plan file a uniform sign plan with their sign permits, and in a center with three or more tenant spaces every wall sign has to fit it. When a tenant applies, your written consent as property owner goes in with the plan.

Published landlord criteria show what those documents can cover: written approval before a sign is built, a set number of drawings, a review period (10 days in one example), no permit application without your approval stamp, contractor insurance naming you as landlord, notice before installation, and UL labels where required. Some also set letter heights by the size of each space and require a photocell and an outside switch on lit signs.

Your criteria can also set how tenant letters mount, for example on a raceway or a wireway, which keeps every storefront in your center reading the same way.

Writing or updating your criteria? Read our guide to landlord sign criteria.

Old poles and grandfathered pylons are where a simple change gets complicated.

Panels are the easy part. If your pole sign no longer meets today's code, replacing or altering too much of it can mean the whole sign has to be brought up to code, so a new cabinet on an old pole can cost you its grandfathered status.

In St. Petersburg and unincorporated Pinellas, moving or replacing an older sign, or spending more than a quarter of its replacement cost on structural work, means it has to meet current code. Unincorporated Pinellas also sets a deadline for older signs to meet current rules, with exceptions, so ask Pinellas County Zoning how it applies to your pylon before you plan work on it.

St. Petersburg requires any freestanding sign 10 feet tall or shorter to be a monument, so a short pole or T-bar sign you replace there may have to come back as a monument.

A new cabinet on an old pole also needs an engineer to confirm that the existing steel and footing can carry the new cabinet's wind load.

A new freestanding sign is engineered from the start. St. Petersburg asks for a sealed installation plan with freestanding signs designed for a 145 mph wind load, and Pinellas County inspects the footing in person before your sign's final inspection.

Pylon signs, monument or pylon? and old sign, new tenant explain your choices when the structure has to change.

A crane lifts the Mantione and Mantione pylon cabinet while two men watch from the lot
Mantione and Mantione's pylon cabinet is our job on Duhme Road in Seminole, lifted here by crane toward its single steel column.Mantione and Mantione, Seminole

Clear entrances and building numbers help delivery drivers find the right door.

Florida's building code calls for address numbers at least 4 inches tall with a half-inch stroke, in a contrasting color and visible from the street. Where an address can't be seen from the road, the code calls for a monument, pole or other sign that shows it. In Clearwater, every freestanding and monument sign needs its own address sign, and in unincorporated Pinellas, putting your street number on a freestanding sign adds 8 square feet a face to its allowance.

Room and suite numbers at the doors of permanent spaces need raised characters and braille, while building directories and tenant names are exempt from the ADA sign rules. Directories built with removable strips let you change tenant names without a new sign.

Good wayfinding starts with how people move through your property, from the road to the right door, before any sign is designed. Address signs covers the numbers drivers look for.

Glass double doors and a transom lettered P32 Ship Store 260, with the PORT 32 Tierra Verde logo on each door
We lettered the PORT 32 Ship Store's transom and doors in Tierra Verde with its name and suite number, so visitors find unit 260.PORT 32, Tierra Verde
Elysian post-and-panel ground sign with a second tenant panel in a landscaped bed
Elysian's post-and-panel ground sign, with a second business's panel below and the street number on its frame, is one of our jobs.Elysian

Send Tom everything for each property at once.

If you manage several properties, one request can cover all of them. Include:

  • The address of each property.
  • A photo of each sign from the road.
  • Which positions are changing.
  • Your new tenants' logo files.
  • Your sign criteria, if you have them.

What to send Tom explains each item.

Short answers for property managers

It depends on your city and on what changes. St. Petersburg needs no permit for a face of the same size and material in a legal sign, while Pinellas County lists a face change permit for existing signs, so check with the office that reviews signs at your address before you order.

Send Tom a photo of your plaza sign from the road.

Tell us which positions are changing and add your tenants' logo files. We send your price and a proof to approve before anything is made.

Call Tom 727-370-5060