Hit Signs

Offices and practices

We design signs that take a first-time client from the road to your front desk.

A new patient or client reads your road sign once, at driving speed, then looks for your door and your suite. We size your letters for your road and plan each sign on the way in, so start by sending Tom Coletta, who owns Hit Signs, a photo of your office from the road.

Call Tom 727-370-5060
Shown
Mantione and Mantione, Duhme Road, Seminole
Based in
St. Petersburg, Florida
A crane lifts the Mantione and Mantione pylon cabinet while two men watch from the lot
Mantione and Mantione's pylon cabinet is our job on Duhme Road in Seminole, set here by crane.

Your road sign has to read at driving speed.

Drivers read your road sign once, at speed. US Sign Council research puts average legibility at about 30 feet of reading distance for every inch of capital letter height, falling toward 20 feet in busy traffic.

Height matters as much as size. Copy 5 feet or less above the ground can be hidden by other vehicles, so the same research recommends keeping your copy at least 7 feet up where people arrive by car. That is research guidance, not a code rule, and your city may limit how tall a low sign can be.

Lit signs read farther at night: in the council's test-track research, internally lit signs read 40 to 60 percent farther than signs lit from outside.

A new freestanding sign is engineered. St. Petersburg asks for a sealed installation plan with freestanding signs designed for a 145 mph wind load, and Pinellas County inspects the footing in person before it signs off on your sign.

Work out how tall your letters need to be.

Enter the lanes in front of your office and how far your wall sits from the curb. The answer is a starting point from published industry formulas, and your city and your landlord can cap it.

Your letters are
At night your letters are

Suggested minimum letter height

10 in

(2 lanes x 10 + 30 ft from the curb to your wall) / 5 = 10.0 in before adjustments.

  • A wall sign that runs parallel to traffic usually needs taller letters than a sign facing oncoming drivers.

How far your door sits from the road decides which sign you need.

These are the four common choices, and each one fits a different kind of building.

SignWhen it fitsWhat to watch
Letters or a panel over your doorYour building faces the road, close enough for drivers to read your wall.Size your letters to your road with the calculator above.
Monument signA low sign at your driveway, for a building set back from the road.Copy close to the ground can be hidden by parked and passing cars.
Pylon signA tall sign for a building set back from a fast road.Pylons need sealed engineering and a footing inspection, and some cities limit where they can go.
A panel on a shared signYour office is one of several on an office-park or plaza sign.Your landlord or property manager controls the shared cabinet and the size of your panel.

Monument or pylon? compares the two freestanding signs in more detail.

One practice needed a road pylon, and one needed a panel over its door.

Finished Mantione and Mantione pylon cabinet reading General and Cosmetic Dentistry, with a ladder at its base
Mantione and Mantione's finished pylon cabinet stands on Duhme Road in Seminole, on a raised concrete island guarded by bollards, high above the parked cars.Mantione and Mantione, Seminole
Vaughn Law flat panel sign above the teal front door of a gray building with teal pillars
We made Vaughn Law's storefront sign: one panel over the front door carries the firm's monogram, name, phone number and web address.Vaughn Law

If your office faces the street, a panel over your door may be all you need.

A flat panel can carry your name, logo, phone number and web address with no wiring at all. Flat panels are often aluminum composite: two thin aluminum skins over a plastic or mineral core, made for indoor and outdoor use.

Larger offices and industrial buildings often put their name on their own building. Channel letters light up after dark, and dimensional letters give you a solid, unlit name for a daytime office.

Once clients park, your address and suite number take over.

Florida's building code calls for address numbers at least 4 inches tall with a half-inch stroke, in a color that contrasts with their background and visible from the street. Where your address can't be seen from the road, the code calls for a monument, pole or other sign that shows it.

Suite and room numbers at the doors of permanent rooms follow the ADA Standards: raised characters, Grade 2 braille, and a mounting height of 48 to 60 inches on the latch side of the door. Building directories and the names of the businesses inside are exempt.

No sign maker can promise that your building complies with the ADA. The law makes both your landlord and you responsible, and your architect or code official decides which signs your building needs.

Address signs covers the numbers people look for from the road.

Your reception logo is what clients see up close.

Reception logos are cut from metal, acrylic, formed plastic or laminate. Stud-mounted letters go up from a full-size paper pattern taped to your wall, so each one lands where it should, with at least an eighth of an inch of space behind it.

Standoff panels hang on short barrels anchored to your wall, with caps that hold the panel in place.

Your company name and logo carry no ADA requirements, so your reception wall is yours to design.

On conference room and office glass, dusted film gives a frosted look and is rated up to 9 years on interior glass. Lobby and office signs and window frosting cover both.

Angled view of the TruAdvisors gold logo glowing blue on a navy conference room wall beside a wood table and black chairs
TruAdvisors' gold logo glows on the navy wall of its conference room, where its clients sit down to talk.TruAdvisors

If you own the office building, start with your road sign.

Replacing an old pole sign with a new double-cabinet sign means building a new freestanding sign, which needs sealed engineering. If your old sign no longer meets today's code, replacing it, or spending more than a quarter of its replacement cost on repairs or structural changes, means it has to meet current code in St. Petersburg.

Signs for property managers covers shared road signs and tenant panels, and old sign, new tenant explains what can be reused.

Send Tom a photo of your office from the road.

Add a photo of your entrance and your suite number. We send your price and a proof to approve before anything is made.

Call Tom 727-370-5060