Hit Signs

Channel letters in St. Petersburg

We build channel letters for St. Petersburg storefronts.

From our St. Petersburg shop we take your letters from a design you approve through installation. See our projects on 4th Street South and 3rd Street South, and check how much space your wall has and when you can light your letters.

Call Tom 727-370-5060
Shown
Taylor Sam's, 312 3rd St S
Based in
St. Petersburg, Florida
Taylor Sam's white channel letters and round logos on a dark fascia band above two wood-look canopies, by day
Our channel letters and round logo mark Taylor Sam's at 312 3rd St S in downtown St. Petersburg.

Check that your address is inside the City of St. Petersburg.

A St. Petersburg mailing address does not always mean the city's rules apply to your sign. The City of St. Petersburg runs its own building department, as do Clearwater, Largo, Seminole and other cities, while Pinellas County serves the unincorporated county and several smaller cities and towns.

Pinellas County keeps the list of which building department serves each area. If your property is outside the city, read sign permits in Pinellas County instead.

Your storefront frontage sets how much sign the city allows on your wall.

In St. Petersburg, your wall signs can add up to 1.75 square feet for every foot of your building frontage, up to a cap set by your zoning district. Measure the width of your own storefront wall, not the whole lot. In a multi-tenant building where each tenant has its own entrance, your frontage is your own facade.

  • The cap is 48 square feet in neighborhood districts (NT, NS, NSM, NMH and NPUD), corridor residential districts (CRT and CRS) and the industrial traditional district (IT).
  • The cap is 150 square feet in the corridor commercial districts (CCT and CCS), the suburban center districts (RC, EC and IC), the downtown center district (DC) and the industrial suburban district (IS).

For example, 30 feet of storefront gives you 52.5 square feet of wall sign in a CCT or DC district, but only 48 square feet in a neighborhood district.

You can split your allowance across several wall signs, as long as the total stays inside it. For individual letters, the city draws one simple shape around the whole group and counts its area. For a cabinet, it counts the full face, frame included, so the same name can use more of your allowance in a cabinet than as separate letters.

If your property was developed under one plan, its owner files a uniform sign plan with the city along with its sign permits, and in a center with three or more tenant spaces your wall sign has to fit that plan. If you apply as a tenant, the property owner's written consent goes in with the plan.

These figures come from St. Petersburg's sign code. Sign codes change, so confirm the current rule for your property with the city, or ask Tom, before you order. To size your letters within your allowance, find your letter height.

These city rules decide where your letters go and when they can be lit.

Each rule comes from St. Petersburg's sign code and applies to wall signs across the city.

Windows and doors
Your letters can't go over your windows, doors or other openings in your wall.
How high
Wall signs stay at or below the third floor, unless another rule in the city code allows more.
Homes nearby
If your wall is within 50 feet of a single-family home, or of a lot zoned for one, the city does not allow letters lit from inside. Ask about letters that need no lighting, such as dimensional letters.
Exposed light
The city prohibits signs where you can see the bare bulb or light source from off your property, except designated historic signs. Ask the city how that applies before you plan open-face neon or exposed LEDs.
Projecting signs
A sign that sticks out from your wall at a right angle, more than 6 inches, is a projecting sign, which the city treats as a type of wall sign. Its bottom has to be at least 8 feet off the ground.
Over the sidewalk
Only the downtown center (DC) and corridor commercial traditional (CCT) districts allow a wall sign over the sidewalk, and only with the city's minor easement permit. For a flat sign over the sidewalk, ask the city what clearance it wants.

Here is what the city asks for in a wall sign permit.

St. Petersburg's sign permit checklist sets out what goes into a wall sign permit:

  • One application covers every wall sign on your building, and each freestanding sign gets its own application.
  • Building elevations show your storefront's dimensions and every existing and proposed sign, with your unit highlighted if you are in a multi-tenant center.
  • A wall sign installation plan is sealed by a state certified design professional and shows complete mounting details.
  • Lit signs show NEC listing and labeling, an electrical and wiring plan and the UL listing, and the application carries an electrical scope of work with its cost.
  • Copies of any sign variances go in with the rest.

Applications go through the city's online permit portal, with plans reviewed electronically. Applicants have 10 business days to upload plans or answer review comments, or the city ends the application, and scheduling inspections depends on the contractor's license status.

State rules that apply in the city

In Florida, a certified sign specialty electrical contractor may install and wire electric signs up to the last disconnect. Electrical work on your building's side of that disconnect belongs to an electrical contractor. Our guide to who connects power to your sign explains the split.

The 9th Edition of the Florida Building Code takes effect on December 31, 2026, and brings in the 2023 National Electrical Code. The edition in force on the day a permit application is first submitted is the one that governs it.

Sign permits in St. Petersburg walks through the permit step by step.

A landmark or a historic district adds an approval before your permit.

If your building is a local landmark or sits in a local historic district, your letters need a Certificate of Appropriateness from the city before your sign permit. Commercial signs are on the list that city staff review, and the staff application fee is $50.

Once your certificate is approved, the permits for your letters need to be pulled within 18 months.

St. Petersburg also keeps an inventory of signs of historic significance. A sign 40 or more years old can be added to it, and a listed sign is exempt from the city's height, area and location limits.

Send Tom these details for your St. Petersburg storefront.

  • A straight-on photo of your wall.
  • Your street address, which decides which building department reviews your sign.
  • Your logo, in whatever file you have.
  • How many feet of storefront you have, if you know it.
  • Your landlord's sign criteria, if your lease has them.
  • Whether you want your letters lit.
  • Whether your building is a local landmark or in a local historic district, if you know.

Our guide to what to send Tom has the full list.

Send Tom a photo of your St. Petersburg storefront.

Add your street address and your landlord's sign criteria if you have them.

Based in
St. Petersburg, Florida

Add photos of your building, your logo file and your landlord's sign rules if you have them. Up to 5 files, 10 MB each.

Add more details for Tom (optional)
Best way to reach you (optional)
Is there a sign there now?
Lit or not lit?

How we handle your details